Ridder Cogs, Chains, Links & Couplings
Ridder Couplings
zinc-plated coupling for connecting motor gearboxes to tubular shafts. The chain coupling is suitable for absorbing small centering and alignment errors. The chain coupling set consists of a 16-tooth 1⁄2"x5⁄16" sprocket for the tubular shaft, a duplex chain and a master link. The tubular shaft sprocket must be fixed to the tubular shaft by welding.
Bolt on Zinc-plated 5/8"x3/8" coupling for connecting gearboxes to tubular shafts. The bolted chain coupling set consists of a 16-tooth 5/8"x3/8" sprocket for the tubular shaft, a duplex chain and a master link. (Requires 2 per motor)
Ridder Chains & Links
Duplex Chain - 1/2" x 5/16" for joining motor gearboxes to sprockets/cogs.
Duplex Chain - 5/8" x 3/8" for joining motor gearboxes to sprockets/cogs.
Sprockets / Cogs
Welded Zinc-plated 3/4" 7/16/"" sprocket wheel for mounting on to tubular shafts using duplex chain.
Welded Zinc-plated 1/2" 5/16/"" sprocket wheel for mounting on to tubular shafts using duplex chain.