Ventilation Racks, Pinions, Bearing Plates & Connectors
Ridder Racks
Straight, zinc-plated sheet steel rack for either 22m or 30mm pinion housing units. Underneath on the back of the sheet steel rack there is a square hole. This is for mounting a coach bolt for extra run-out protection. The sheet steel rack can be attached to an air vent or ventilation flap with a window bracket set.
Please send us an enquiry for more information or require a different size or length.
Straight, zinc-plated sheet steel rack for 22mm pinion housing.
Underneath on the back of the sheet steel rack there is a square hole. This is for mounting a coach bolt for extra run-out protection.
The sheet steel rack can be attached to an air vent or ventilation flap with a window bracket set.
Other lengths (L) and specifications on request.
Bulk Discount Rules Apply on 10 +
$12.47
Straight, zinc-plated sheet steel rack for 30mm pinion housing.
Underneath on the back of the sheet steel rack there is a square hole. This is for mounting a coach bolt for extra run-out protection.
The sheet steel rack can be attached to an air vent or ventilation flap with a window bracket set.
Other lengths (L) and specifications on request.
Bulk Discount Rules Apply on 10 +
$13.27
Ridder Pinion Houses
The 22/30mm Pinion house unit with appropriate sheet steel rack are low-maintenance drives for the operation of vents and ventilation flaps, etc. The pinion houses are contained in a zinc-plated sheet steel housing and feature hardened pinions, slide bearings and plastic guide rollers.
The Ridder 30mm Pinion House rack drives can be mounted on 1" tubular shafts (33.7 mm dia., minimum wall thickness 2.5 mm). Here, the pinion is fastened on the tubular drive shaft with two set screws (tightening moment 8 Nm).
Bulk Discount Rules Apply on 10 +
$18.71
The Ridder 22mm Pinion House rack drives can be mounted on 1" tubular shafts (33.7 mm dia., minimum wall thickness 2.5 mm). Here, the pinion is fastened on the tubular drive shaft with two set screws (tightening moment 8 Nm).
Bulk Discount Rules Apply on 10 +
$18.71
Bearing Plates
Zinc-plated straight slide bearing plate with sintered bronze ring bearing for 1"" tubular shaft - 137mm
Bulk Discount Rules Apply on 10 +
$10.34
Zinc-plated straight slide bearing plate with sintered bronze ring bearing for 1"" tubular shaft - 97mm
$8.58
Ventilation Torque Tube Flat Plate Split Bearing 1" Replacement - Useful to replace Bearing plates on an existing structure
$15.07
Rack Connectors
Aluminium window bracket set for fixing sheet steel racks to Ventilation Framing. Supplied with stainless steel bolt and self-locking nut.
Bulk Discount Rules Apply on 20 +
$4.98
Galvanised Steel Rack Foot Bracket. 1 Piece to suit 35sq vent arm
Bulk Discount Rules Apply on 20 +
$5.28