Select Page

"VORTEX" Circulation Fans

The Redpath Horizontal air flow fans (HAF)have been specifically designed to be a 100% corrosion proof fan for indoor use only. This becomes important in the often harsh environment that a greenhouse or animal shelter can provide. Humidity and chemicals in the environment can be aggressive on any air fan system as they draw a high percentage of surrounding air through themselves.

How Do "VORTEX" Fans Work?

The very simple principle of Horizontal air flow is firstly to invigorate the internal environment and secondly to circulate, mix and stabilize the temperature regime. In still air, warm air rises and will quickly pool in the highest point of the roof, however this is very easily prevented by causing some gentle air motion. This air motion needs only to be very slight but thoroughly throughout the entire house.

The third but most important benefit is the reduction in fungal sprays required as a result of installing Vortex Fans.

The reason for this is that the gentle air movement displaces transpiration moisture from the foliage and lowers the dew point at the leaf surface. The combination of air movement and drier foliage radically inhibits fungal growth of all kinds and may substantially reduce the need to use fungicides.

Benefits of using "VORTEX" Fans

  • Reduced air stratification (temperature layers)
  • Improved C02 distribution
  • Helps prevent “calm” pockets of air within the environment
  • Balance out humidity levels
  • Reduced fungal disease in plants and respiratory disease in animals

Installation Suggestions

In a greenhouse situation, to generate a circular horizontal air movement, site the unit above head height and approximately 3-10 metres in from the gable end wall and 3-8 metres or one third from the side wall. (See Diagram A). This will provide a gentle drift down one side across the end and back up the opposite side where it will be recirculated.

Suspend the units from chain or stout cord and attach to the roof at strong supports longer than the actual fan. This will brace the fan and prevent any swinging or sway induced by the airflow.

Use two fans per bay on single span houses. For multi-bay structures use one fan per bay and site each adjacent fan at opposite ends of the house. In longer houses than 35-40 metres we would suggest a additional fan units be situated every 30-35m own the bay to assist air movement for the full length.

Any Questions or to request a quotation,
Please send us an enquiry to [email protected] or use the button below.

"VORTEX" Fans

The Redpath Vortex 570 horizontal air flow fan features a corrosion-proof Stainless Steel Body, and double-end safety grills. A 500mm six finned blade is powered by a Single Phase, 350W 1450rpm motor and moves an astonishing 9500m3 of air per hour

The Redpath Vortex 450 horizontal air flow fan is manufactured in Europe form Corrosion resistant UV resistant powder coating Steel body and double-end safety grills. Features long life, quiet, energy efficient, yet powerful 550watt single phase 1320rpm motor that moves 7000m3 of air per hour.

Related links