SMALL or LARGE !
SPANS 6m to 10.65m
DOUBLE RIDGE VENTED
CONSTRUCTED ON SITE
SINGLE or TWINSKIN
PEST SCREENS OPTION
ENERGY EFFICIENT DESIGNS
Vented roof designs
The Redpath pitch roof ridge vented designs are the top of the line greenhouse designs from Redpath. Used for year-round production of vegetables, flowers and nursery crops that require accurate environmental control irrespective of the outside conditions.
These designs may be twinskin or singleskin clad with Duratough 210 micron film. The cosecant rafter “A” frame truss design is a unique Redpath feature and it allows superior light transmission through to the crop via reduced overhead structural shading. The truss/rafter design is also shaped so that any internal condensation is prompted to run to the edge of the roof sheets. By reducing condensation sunlight transmission to the crop is further improved and damage from potential overhead dripping is reduced.
The ridge ventilation system can be either single facing or double ridge “gull wing”. The roof ventilator also includes aluminium draft strip upstands along the full length of roof vent closure points which provide a superior weather flashing and vents are fully automatic operating or available with a manual option.
Gutters are a heavy gauge folded type long-life 250mm wide structural part, and are a ‘walkthrough’ design. All gutters have a powder coated exterior and include a 100% rust-proof rain head at gutter ends. The gutters are included standard on outside pole lines also.
Redpath offers construction teams nationwide and we manage the building permit application and we then continue to offer local after sales service. Redpath have supplied and erected 1000s of these designs throughout our nearly 40 year history.
Redpaths 5 Year gold series warranty applies
Span / Bay Widths: 6m, 8m, 9.6m & 10.65m spans (you can connect multiple spans side-by-side)
Post spacing lengthways: 3 metres between posts
Height to gutter options: 3m, 3.5m, 4m or 4.5metres
Apex height: Up to 6 or 7 metres
Roof Ventilation Design: Double ridge butterfly (30% floor area vented) or single ridge vent system
Vent drive systems: Dutch high quality “Ridder” designs.
Roof vent upstand flashings & end weather flashings: Yes included as standard
Side ventilation: (automatic or manual) also available
Vent mechanism: Ridder motors and controllers, indirect Geared rack and pinion system
Roof cladding: Double or Singleskin Duratough 210 4 Year film (service life 6-8 years)
Wall cladding: Double-skin Duratough 210micron 4 Year film (service life 6-8 years)
Greenhouse film anti-fog package: Included
Frame Guard Tape: Polyguard fitted to all roof members that touch the plastic included
Doors: Sliding door with aluminium framed, aluminium base sheet with clear acrylic top section panels, doors may be in end or sidewall
Footings: Typically 1.25 metre deep x 0.450 diameter (soil type dependent)
Wind load: 120kph, greater if required
Crop loading: 15kg 2- 30kg m2, greater if required, crop kit system included on request. (overhead wire location by client)
Snow load: Yes, snow load compliant up to 30kg m2-50kg m2
Installation: Redpath can supply in Kit form or have your nearest subcontract builder install your building for you.
Main assembly: all bolted design, barrier sleeves (3mm thick) fitted to all poles at ground contact for superior anti-corrosion
Warranty: Yes, Redpath 5 Year gold series manufacturer’s warranty, and warranty on covering